Exabyte EXB-8205 Instruções de Operação descarregar pdf (Página 116)

100

101

6.1 About This Command

The LOAD/UNLOAD command causes the CTS to load or unload

the data cartridge.

Loading a Data Cartridge

When loading a data cartridge, the CTS performs the following

actions:

1. Loads the tape in the tape path.

2. Positions the tape to the logical beginning of tape (LBOT).

Note: If your tape drive is an EXB-8505XL or EXB-8205XL and you

attempt to load a 160m tape that does not have a Recognition

System stripe (see page 3-2), the CTS automatically ejects the

data cartridge. The CTS returns Check Condition status to the

initiator with a sense key of Unit Attention (6h) and an FSC of

C5h. (All EXATAPE 160m XL 8mm data cartridges include

the Recognition System stripe.)

Unloading a Data Cartridge

When unloading a data cartridge, the CTS performs the following

actions:

1. If necessary, writes any information in the buffer to tape and, for

8200c, 8500, and 8500c format tapes, writes the EOD mark. (If

there is data in the buffer because an earlier WRITE (0Ah)

command was terminated with Check Condition status, that

data is discarded before the LOAD/UNLOAD command is

executed.)

2. Rewinds the tape to the physical beginning of tape (PBOT).

3. Unloads the tape from the tape path.

4. Ejects the data cartridge.

Note: Slightly different actions may occur when you use the unload

button instead of the UNLOAD command. Refer to page 3-3

for a description of these actions.

6-2

EXB-8205 and EXB-8505

(Standard and XL)

510503

6 LOAD/UNLOAD (1Bh)

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 445 446

Comentários a estes Manuais

Sem comentários

Exabyte EXB-8205 Instruções de Operação Página 116

Comentários a estes Manuais