Exabyte EXB-8205 Instruções de Operação descarregar pdf (Página 69)

100

101

Status Reported for Unload Procedure

If a command is issued to the CTS during the unload procedure, the

CTS returns Check Condition status with the sense key set to Unit

Attention (6h). Once the Unit Attention condition is reported, all

subsequent commands (except INQUIRY and REQUEST SENSE)

receive Check Condition with the sense key set to Not Ready (2h).

(For information about clearing a Unit Attention condition, see

Section 3.9.)

Error During Unload Procedure

If an error exists before or during the unload procedure, the unload

sequence will be suspended and the top amber LED will flash. If the

unload button is pressed again, the unload sequence will be

reattempted; however, unwritten data in the buffer will not be written

to tape. The buffer and errors will be cleared.

Note: If the CTS’s EEPROM image includes the “super fast” unload

button setting, the CTS will unload the tape even if an error is

present during the unload procedure, unless the error is a

serious hardware error as follows:

The CTS is unable to remove the tape from the tape path

and spool all of it into the cartridge. In this case, the CTS

does not eject the tape. This prevents the cartridge lid

from closing on the exposed tape.

The front load motor is not functioning. In this case, the

CTS is physically incapable of ejecting the cartridge.

May 1994 EXB-8205 and EXB-8505

(Standard and XL)

3-7

3 Implementing CTS Operations

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 445 446

Comentários a estes Manuais

Sem comentários

Exabyte EXB-8205 Instruções de Operação Página 69

Comentários a estes Manuais