Exabyte EXB-8205 Instruções de Operação descarregar pdf (Página 272)

Byte 20, Bits 5 - WP (Write Protect) The data cartridge is write

protected.

Byte 20, Bit 4 - FMKE (Filemark Error) A write error occurred when

the CTS was attempting to write a filemark.

Byte 20, Bit 3 - URE (Under Run Error) A hardware data formatter

underrun error occurred. (Byte 20, bit 0, is also set to 1.)

Byte 20, Bit 2 - WE1 (Write Error 1) The maximum number of

rewrites was attempted. Media error.

Byte 20, Bit 1 - SSE (Servo System Error) A catastrophic hardware

error occurred. The servo system detected an error.

Byte 20, Bit 0 - FE (Formatter Error) A catastrophic hardware error

occurred. The data formatter detected an error.

Byte 21, Bit 7 - RSVD This bit is reserved.

Byte 21, Bit 6 - UCLN A cleaning cartridge was loaded but the

cleaning tape was used up, so a successful cleaning was not

performed. This bit is reset to 0 after a successful cleaning is

performed or the CTS is reset.

Byte 21, Bit 5 - RRR (Reverse Retries Required) The CTS was

forced to invoke retries in order to move the tape properly. This

bit is reset to 0 when a new tape is loaded.

Byte 21, Bit 4 - CLND The CTS has been cleaned. This bit is reset

to 0 when the next REQUEST SENSE command is received.

Byte 21, Bit 3 - CLN The CTS needs to be cleaned. This bit is reset

to 0 when a successful cleaning cycle is performed.

Byte 21, Bit 2 - PEOT (Physical End of Tape) The data cartridge is

positioned at PEOT.

Byte 21, Bit 1 - WSEB (Write Splice Error) A write splice error

occurred. The CTS encountered blank tape when it was

attempting a write splice operation. This is a Hardware Error.

Byte 21, Bit 0 - WSEO (Write Splice Error) A write splice error

occurred. The CTS passed the splice position when it was

attempting a write splice operation. This is a Hardware Error.

18-10

EXB-8205 and EXB-8505

(Standard and XL)

510503

18 REQUEST SENSE (03h)

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 445 446

Sem comentários

Exabyte EXB-8205 Instruções de Operação Página 272