Exabyte EXB-8205 Instruções de Operação descarregar pdf (Página 342)

EEPROM

option

Definition Possible values Default

value

Option is

set to...

Read retry

count

Read Retry Count –Byte03of

the Read-Write Error Recovery

Page—see page 10-26.

00h – The CTS will not reread

any physical blocks during a

read operation.

01h – The CTS will reread a

physical block one time before

reporting an unrecoverable read

error.

0Bh – The CTS will reread a

physical block two times before

reporting an unrecoverable read

error.

0Bh

(defaults to

two retries)

Write retry

count

Write Retry Count –Byte08of

the Read-Write Error Recovery

Page—see page 10-27.

00h – The CTS will not rewrite

any physical blocks during a

write operation.

Data integrity

cannot be guaranteed with this

setting

.

0Bh – The CTS will rewrite a

physical block up to 11 times

before reporting an

unrecoverable write error.

0Bh

(11 retries)

Reconnect

threshold

Buffer Full Ratio and Buffer

Empty Ratio – Bytes 02 and 03

of the Disconnect-Reconnect

Page—see page 10-28.

Reconnect Threshold –Byte

03 of the Vendor Unique

Parameters (non-page

format)—see page 10-23.

20h to D0h in units of 3 KBytes

(96to624KBytes)

80h

(384 KBytes)

Maximum

burst size

Maximum Burst Size –Bytes

10 and 11 of the

Disconnect-Reconnect

Page—see page 10-30.

0 to FFFFh in increments of 512

bytes

0

Write

compression

(DCE)

(EXB-8505

only)

DCE (Data Compression

Enable) – Byte 02, bit 7, of the

Data Compression Page—see

page 10-35.

Note: This option applies

only if the EXB-8505’s

default density is set to

8500c format. If you are

using another format,

this bit is set to a fixed value.

ON – Enable data compression.

OFF – Disable data

compression.

ON for

8500c and

8200c

formats.

OFF for

8500 and

8200

formats.

A-6

EXB-8205 and EXB-8505

(Standard and XL)

510503

Appendix A EEPROM Options

1 2 ... 337 338 339 340 341 342 343 344 345 346 347 ... 445 446

Comentários a estes Manuais

Sem comentários