Exabyte EXB-8205 Instruções de Operação descarregar pdf (Página 279)

100

101

20.2 Field Definitions

Byte 01, Bit 0 - Immed

The Immed bit is used to determine when command status is

returned to the initiator, as follows:

0 – Status is reported to the initiator when the REWIND command is

completed.

1 – Status is reported to the initiator when the REWIND command is

initiated by the CTS.

If the CTS’s buffer contains data from a previous WRITE command,

the CTS disconnects from the initiator (if disconnect was enabled by

the Identify message) and writes the data in the buffer to the tape.

If the Immed bit is set to 1, the CTS reconnects to the initiator

when the write operation has completed successfully. It then

returns Good status and performs the rewind operation.

Note: Completing the write operation includes emptying the

buffer to tape and writing the EOD mark (8500c, 8500, and

8200c format tapes only).

If the Immed bit is set to 0, the CTS reconnects and returns status

when the rewind operation is complete.

Byte 05, Bit 7 and 6 - Vendor Unique

There are no vendor unique definitions for this command.

May 1994 EXB-8205 and EXB-8505

(Standard and XL)

20-3

20 REWIND (01h)

1 2 ... 274 275 276 277 278 279 280 281 282 283 284 ... 445 446

Comentários a estes Manuais

Sem comentários

Exabyte EXB-8205 Instruções de Operação Página 279

Comentários a estes Manuais