Exabyte EXB-8205 Instruções de Operação descarregar pdf (Página 65)

100

101

EXATAPE 8mm Data Cartridge

15m 54m 112m 160m XL

EXB-8205 and

EXB-8505

✔✔✔

Not supported

(automatically

ejected)

EXB-8205XL and

EXB-8505XL

✔✔✔✔

EXB-8200 and

EXB-8200SX

✔✔✔

Not

supported

EXB-8500 and

EXB-8500c

✔✔✔

Not

supported

Loading Data Cartridges

When a data cartridge is inserted into the CTS, the tape is

automatically loaded into the tape path and positioned at LBOT.

During the load operation, the CTS determines the tape format and

the length of the tape (see page C-4 for an explanation of the

autosizing process). The CTS goes to the ready state (bottom LED on

solid) after it has finished loading the tape.

If you want to prevent automatic loading, you can disable it using the

MODE SELECT command (see the NAL bit on page 10-53), or you

can request an EEPROM option that prevents autoloading (see the

“No autoload cartridge” option on page A-8). If you have prevented

autoloading, you must issue a LOAD (1Bh) command to load the tape.

Unloading Data Cartridges

Depending on the CTS’s EEPROM image (see the “Button action”

option on page A-20), the unload button can function in one of three

ways:

As a “normal” unload button (default)

As a “fast” unload button

As a “super fast” unload button

The following are descriptions of what happens when you press the

unload button in each of its three versions.

Table 3-1 Compatibility of EXATAPE 8mm Data Cartridges and Exabyte 8mm CTSs

May 1994 EXB-8205 and EXB-8505

(Standard and XL)

3-3

3 Implementing CTS Operations

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 445 446

Comentários a estes Manuais

Sem comentários

Exabyte EXB-8205 Instruções de Operação Página 65

Comentários a estes Manuais